TRAFFIC Universal Extra-Strong Absorbent Mat with Self-Adhesive Backing (91 cm x 45 m)

• For preventive containment of spills in high-traffic areas
• Suitable for covering areas with heavy traffic from material-handling equipment
• Creates a safe, non-slip floor surface
• An excellent replacement for “greasy wooden grates”
• The impermeable design prevents contamination of the subfloor
• Colors subject to change
• The mat is equipped with a laminated adhesive layer on one side of the sorbent
• Using this adhesive tape, the sorbent can be firmly attached to the substrate; once attached, the sorbent will remain in place
• Application in a vertical position is also possible
• Oil absorption capacity: 65 L, water absorption capacity: 52 L

Instructions for Use:

The sorbent material is equipped with a self-adhesive laminate with a protective film.

1. Clean the surface of dirt, grease, and other obstacles that could prevent the laminated sorbent mat from adhering.
2. Cut and unroll the required piece of sorbent mat.
3. Gradually peel back a small section of the protective film from the edge of the mat (the cut piece).
4. Apply the peeled-back section of the mat to the surface = adhere it,
5. Gradually peel off the protective film from the mat and slowly and carefully press the exposed adhesive side onto the surface,
6. It is recommended to smooth out the section of the mat as you apply it to ensure it adheres perfectly to the surface,
7. After using (soaking) the carpet or carpet scrap = remove the used carpet,
8. After soaking the carpet with oil, handle the used product—which is classified as a hazardous substance—in accordance with applicable legal regulations,
9. Adhesive residue can be removed with a scraper or using synthetic solvents.