PLASTIC DISPENSER TYPE B, 28/410-130 RED709/50% TRANSPARENT 80202.130

Dispensers for plastic bottles are primarily intended for cosmetic purposes or for NON-AGGRESSIVE chemical substances and preparations. The filled medium passes through the internal mechanism of the dispenser, so we cannot guarantee that the filled medium will not react with the internal mechanism. The suitability of use for chemical preparations is only for the consideration of the customer, we recommend testing it yourself.

The dispenser is equipped with a screw-rotating cap system. For dosing, it is necessary to unscrew the upper part of the dispenser, turn it and then it is possible to dose. To close, the dispenser must be pressed as during dosing and screwed. Total length of the open dispenser: approx. 280 mm maximum, closed: approx. 260 mm, length from the neck of the bottle: 240 mm, outer diameter of the dispensing tube: approx. 6 mm, inner diameter of the dispensing tube: approx. 5 mm.

The dispenser can be used for the bottles listed in the "Related Products" section. They are primarily intended for bottles purchased from us, if they are not intended for our type of bottle, any order will be handled by agreement. The purchased quantity may be adjusted by us.

  LAST  85 PCS. ON STOCK!

Important warning: The seller reserves the right to change the shipping calculation in the event that the actual volume of the ordered goods does not correspond to the calculation of the shipping price according to the e-shop. In case of changes, the customer will be contacted. Thank you for your understanding.